I had our 01 liquid on the dyno @ 101.2 HP

Ashley, it's www.ussaprostar.com

Forgive my ignorance, it's been a long time since I have looked at a ZRT motor. Do they have the power valves? Sounds like a classic example of a power valve stuck open.

There is no need to run a skid plate for ovals. All it will do is add a little weight and take away some of your clearance on the belly pan.

You will need alot more than that. I would recomend about 192 (30 degree tip) steel studs with about 1/2 of them being in the outside belts to start with. I would also recoment using the doudle backer plates with the first 192 and then you can add studs in the outside belts as needed. You will proba...

John Kallock is going to run it this year I believe.

Tim, yes the champ sled has been sold. Dan is calling it quits, but we will make it to a few races this year just to harass all of you in the pits!

The rule should be left alone, besides when is the last time WSA Xtreme Ice has ever weighed anything? I have never seen it in the 6 years I've been wrenching in that circuit.

The intent of the "stir-up" as you call it is not to hook your foot, but to put pressure on the outside of the sled. When you press with your foot, you can get the back end to swing if needed. I dont know about other race organizations, but WSA will not allow anything you can get youre foot cought in.

I don't recall anyone bringing up this point so I thought I would throw it out there. What about the enterence onto the track at ER from Staging? That seems like a very dangerous area to me. There is a huge opening coming off turn 2 with a round wood post there that could really hurt someone. Then t...