Okay Okay

by **(RYAN)** » October 30th, 2001, 10:20 am

Okay, we have a serious problem here..

380 fan.. motor has had a complete new top end putt in it.. It was putt back in the sled and everything hooked up right... The plugs wont even spark when it's turned over..

Any ideas. Maybe the coil or something. I have no clue.

Thanks guys/gals

by **PolarisIndy** » October 30th, 2001, 10:46 am

Kill switch on???
LOL ;)

by **(RYAN)** » October 30th, 2001, 10:54 am

Now i aint that pathetic!!

by **tnt8000** » October 30th, 2001, 11:28 am

chech the mag like we talked about

by **ArcticEd** » October 30th, 2001, 11:33 am

Might be something as simple as a poor connection where the Plug caps screw into the leads from the coils........un-screw them, trim a 1/4 inch or so off of the wire, and screw 'em back together.

by **psycho sledder** » October 30th, 2001, 11:33 am

did you forget to hook up the ground wire? that does wonders

by **(RYAN)** » October 30th, 2001, 12:45 pm

I just got back from outside.. All ground wires are on metal.. It isn't the coil. Tryed another one in it and it still doesn't work.

All other wires are brand new and in the right spots. I'm positive.

Talked to my oldest brother and he said something about the "mag" or something. Who knows, i'm just gonna rip this so called mag apart.

I need a d**n manual! tommorow i definitely will pick one up. Well, i gotta go wash, i'm full of grease!

by **zrcat** » October 30th, 2001, 10:48 pm

Did you tighten the muffler bearings and torque the snaffleloop in order of age?

by **Drewman** » October 30th, 2001, 11:14 pm

Could be the wobbler shaft isn't aligned to the kanuten valve :)____________DREW

by **(RYAN)** » October 31st, 2001, 3:00 am

All wires and everything are connected properly and are grounded where appropriate. I have triple checked them all and they're good.

My only last guess would have to be the voltage regulator. Maybe it went. I'll have to rip it out and see.