Subscribe Today

phazer ski bolt

The general snowmobiling discussion. Discuss snowmobile tech, ask about trail conditions, talk about snowmobiling issues, whatever. Just keep it clean!

phazer ski bolt

Postby phazerfan94 » November 9th, 2004, 3:59 am

anyone ever had trouble getting ski's off of a phazer with the "pogo" type suspension? I got it to spin but it will not move out...
temp. gets colder, nights get longer, snow gets deeper, life gets better...
Posts: 2
Joined: November 9th, 2004, 3:52 am
Location: Michigan

phazer ski bolt

Postby jpiler » November 9th, 2004, 4:47 am

I haven`t seen it on a yami but last year i put new skis on a 92 polaris and the bushing was seized onto the bolt.I ended up cutting both sides of the bolt with a hand air grinder with a small cutting wheel on it.
Posts: 55
Joined: July 22nd, 2003, 7:52 am
Location: Minnesota USA

phazer ski bolt

Postby indyxc » November 9th, 2004, 5:55 am

Very common problem. I removed the coller that the ski attaches to and take the ski to someone who can press the bolt out. Good luck!!
Posts: 3
Joined: January 14th, 2004, 3:11 am
Location: MKE, wi

phazer ski bolt

Postby gnip134 » November 9th, 2004, 7:30 am

I've had that problem need to cut the head of the bolt off......end of the bolt off, and the ski should drop away from the sled....then hopefully the bushing itself will kock out.You need to replace the bushing and the bolt. Don't try to knock that bolt out....better off just buying the new stuff..
Posts: 28
Joined: February 24th, 2004, 2:56 am
Location: Michigan

Return to SnowmobileNews Forum

Who is online

Users browsing this forum: No registered users and 4 guests