Subscribe Today

New trailer loading system

The general snowmobiling discussion. Discuss snowmobile tech, ask about trail conditions, talk about snowmobiling issues, whatever. Just keep it clean!

New trailer loading system

Postby drewalt » February 25th, 2002, 2:25 am

Check out the new trailer loading system. Helps load the sleds and saves the trailer deck from studs.
http://www.sled-parts.com/paddlegrabbers.htm
Email sales@sled-parts.com for ordering info.
drewalt
Member
 
Posts: 18
Joined: July 10th, 2001, 10:33 pm
Location: Michigan

New trailer loading system

Postby Trail Cat » February 25th, 2002, 3:34 am

On the next trailer, I am going to find an old track and cut it in half. Should be a good stud mat. Cheaper too.
Trail Cat
Member
 
Posts: 72
Joined: July 30th, 2001, 3:01 am
Location: Lost in PA

New trailer loading system

Postby extreme_yamaha » February 25th, 2002, 4:34 am

Yes, cut an old track up. that works the best. I have been doing that for years. Works better then any thing you can buy.
extreme_yamaha
 
Posts: 5
Joined: January 4th, 2002, 2:16 am


New trailer loading system

Postby Exjake » February 25th, 2002, 11:52 am

I do the same, just cut a 3 to 4 foot section of old track and screw it down with galvinized sheet rock screws.
Exjake
Exjake
 
Posts: 3
Joined: September 23rd, 2001, 11:04 am
Location: Gloucester Ma.


Return to SnowmobileNews Forum

Who is online

Users browsing this forum: No registered users and 8 guests

cron