Subscribe Today

Pol 440 SnoX - IQ Chassis

Want to bash brands? Go ahead on this board. Profanity, personal attacks or sexual references will not be tolerated and will be deleted.

Pol 440 SnoX - IQ Chassis

Postby cromejob » October 15th, 2004, 3:59 am

[/quote]
those spindles are nothing like cats.[/quote]

You mean practical, strong, time tested and good looking?
[COLOR=#ff3300]If it is Orange.....it has to be good![/COLOR]
cromejob
Member
 
Posts: 246
Joined: February 13th, 2003, 2:43 am
Location: Superior, Wi.

Pol 440 SnoX - IQ Chassis

Postby Snocross861 » October 15th, 2004, 4:25 am

I have to agree those spindles don't look like Cat ones...actually I think the best advice of the season would be for anyone riding a Polaris to stock up on those babies. They look so weak, if you turn the skis too fast they might snap off from the torque...Gonna be funny to watch these things endo...
Snocross861
Member
 
Posts: 24
Joined: July 22nd, 2003, 12:37 pm
Location: Holland, Manitoba, Canada

Pol 440 SnoX - IQ Chassis

Postby zrcat » October 15th, 2004, 6:45 am

[quote]those spindles are nothing like cats.
[/quote]
You're right, poo's are a poor copy, very poor. But, they are more like CAT's than the REV type on the consumer version.
zrcat
Member
 
Posts: 233
Joined: May 17th, 2001, 12:50 am
Location: 3371


Pol 440 SnoX - IQ Chassis

Postby Xtreme XC » October 15th, 2004, 7:00 am

They are nowhere near Cat's. Cat's mounted straight in the bulkhead with a big blob of metal for a spindal. Take a close look at the 2, the geometry between them is not even close.
[IMG]http://i97.photobucket.com/albums/l231/buddypaw/smallpic.jpg[/IMG]
Xtreme XC
Member
 
Posts: 1340
Joined: May 14th, 2001, 12:25 am
Location: Home of da '09 Beaner Champ & '10 Brim Bay Champ

Pol 440 SnoX - IQ Chassis

Postby funkadelic101 » October 15th, 2004, 12:03 pm

To be honest... Anyone that thinks the IQ racer 440 is at all like the IQ Fusion hasn't seen both in person. They are pretty much nothing alike. The IQ reference is only to the A-arm design, and how the arms pivot in reference to the rear part being further outward than the front..... The front ends may look similar due to the "IQ" style A-arm set-up. But there is a huge difference between the two. It's almost as if you guys are saying the old ZX is the same as a Poo GEN II because they have trailing arm designs........
Liberty without Virtue is Slavery to Vice
funkadelic101
Member
 
Posts: 245
Joined: December 6th, 2002, 7:47 pm
Location: .

Previous

Return to Trash Talkers

Who is online

Users browsing this forum: No registered users and 8 guests

cron