Subscribe Today

Okay Okay

Want to bash brands? Go ahead on this board. Profanity, personal attacks or sexual references will not be tolerated and will be deleted.

Okay Okay

Postby (RYAN) » October 30th, 2001, 10:20 am

Okay, we have a serious problem here..

380 fan.. motor has had a complete new top end putt in it.. It was putt back in the sled and everything hooked up right... The plugs wont even spark when it's turned over..

Any ideas. Maybe the coil or something. I have no clue.

Thanks guys/gals
(RYAN)
 
Posts: 3
Joined: October 28th, 2001, 10:19 am

Okay Okay

Postby PolarisIndy » October 30th, 2001, 10:46 am

Kill switch on???
LOL ;)
PolarisIndy
Member
 
Posts: 76
Joined: August 29th, 2001, 2:54 am
Location: Back in BFE!

Okay Okay

Postby (RYAN) » October 30th, 2001, 10:54 am

Now i aint that pathetic!!

(RYAN)
 
Posts: 3
Joined: October 28th, 2001, 10:19 am


Okay Okay

Postby tnt8000 » October 30th, 2001, 11:28 am

chech the mag like we talked about
2 sleds
30 000km combined
thats a hell of alot of real world riding!
tnt8000
Member
 
Posts: 264
Joined: May 29th, 2001, 7:18 am
Location: Ontario

Okay Okay

Postby ArcticEd » October 30th, 2001, 11:33 am

Might be something as simple as a poor connection where the Plug caps screw into the leads from the coils........un-screw them, trim a 1/4 inch or so off of the wire, and screw 'em back together.
[img][url=http://s2.photobucket.com/user/ArcticEd/media/Bunny.jpg.html]http://i2.photobucket.com/albums/y48/ArcticEd/Bunny.jpg[/img]


Harley Davidson: The most efficient way to turn gasoline into noise without the embarrassing by-product of horsepower.


Image


F/O FUR
ArcticEd
Member
 
Posts: 622
Joined: May 21st, 2001, 4:27 pm
Location: The Home Office in Beautiful Rohrsburg, Pa.

Okay Okay

Postby psycho sledder » October 30th, 2001, 11:33 am

did you forget to hook up the ground wire? that does wonders
psycho sledder
Member
 
Posts: 492
Joined: August 23rd, 2001, 12:40 pm
Location: Fernie BC

Okay Okay

Postby (RYAN) » October 30th, 2001, 12:45 pm

I just got back from outside.. All ground wires are on metal.. It isn't the coil. Tryed another one in it and it still doesn't work.

All other wires are brand new and in the right spots. I'm positive.

Talked to my oldest brother and he said something about the "mag" or something. Who knows, i'm just gonna rip this so called mag apart.

I need a d**n manual! tommorow i definitely will pick one up. Well, i gotta go wash, i'm full of grease!
(RYAN)
 
Posts: 3
Joined: October 28th, 2001, 10:19 am

Okay Okay

Postby zrcat » October 30th, 2001, 10:48 pm

Did you tighten the muffler bearings and torque the snaffleloop in order of age?
zrcat
Member
 
Posts: 233
Joined: May 17th, 2001, 12:50 am
Location: 3371

Okay Okay

Postby Drewman » October 30th, 2001, 11:14 pm

Could be the wobbler shaft isn't aligned to the kanuten valve :)____________DREW
[green][b]I LOVE THE SMELL OF TWO-STROKE IN THE MORNING[/b][/green]
Black 01 ZL800esr, Ya I got mirrors, all the better to see how far back you are
Drewman
Member
 
Posts: 21
Joined: August 14th, 2001, 7:30 am
Location: Finally got rid of that damm Yamahahaha

Okay Okay

Postby (RYAN) » October 31st, 2001, 3:00 am

All wires and everything are connected properly and are grounded where appropriate. I have triple checked them all and they're good.

My only last guess would have to be the voltage regulator. Maybe it went. I'll have to rip it out and see.



(RYAN)
 
Posts: 3
Joined: October 28th, 2001, 10:19 am

Next

Return to Trash Talkers

Who is online

Users browsing this forum: No registered users and 6 guests

cron