Subscribe Today

Ceramic/Teflon Coating-pipes/pistons

Want to discuss racing? Race setups? Which kind of racing is best? This is the race place!

Ceramic/Teflon Coating-pipes/pistons

Postby ccperformance.com » December 7th, 2001, 2:31 pm

Ceramic/Teflon Coating-pipes/pistons
Tired of looking at your rusty pipes? Better yet, are you putting new pipes on your sled? Your new pipes are likely larger volume and made of thinner metal than the ones you are taking off. With this in mind it's very important to protect your new investment and keep the heat in the pipe more efficiently than the heat shields on your stock pipes.

Ceramic coating will protect your new pipes from rusting and your old pipes from rusting again. Additionally they'll keep the heat in your pipe and dramatically lower your under hood temps so you can make the horsepower your expecting to make......For more info or pics contact info@ccperformance.com or go to www.ccperformance.com or call 248-682-2453
ccperformance.com
 
Posts: 3
Joined: December 7th, 2001, 2:25 pm
Location: Waterford, Mi

Ceramic/Teflon Coating-pipes/pistons

Postby ostapowich » December 10th, 2001, 7:03 am

TRY WRAPPING THEM.
ostapowich
Member
 
Posts: 13
Joined: December 3rd, 2001, 12:46 am
Location: mb

Ceramic/Teflon Coating-pipes/pistons

Postby Flatout » December 11th, 2001, 11:30 am

Most of the rust damage is inside the pipe!
I would be impressed if they could ceramic coat them inside and out!
Flatout
Member
 
Posts: 191
Joined: November 20th, 2001, 5:05 am
Location: Ottawa Ont.



Return to General Racing Board

Who is online

Users browsing this forum: No registered users and 4 guests

cron