Subscribe Today

What does this pull or install (pic)!!!

The name says is all. Got an older sled? Restoring a sled? Discuss your project with other collectors here.

What does this pull or install (pic)!!!

Postby h2onsnow » February 28th, 2006, 2:23 am

Can anybody tell me what this pulls off or installs!!!It says Grissley Products on the box w/ SKIW 79 ROTAX in the part# area.
[img]http://i386.photobucket.com/albums/e48/h2onsnow/ClutchPuller.jpg[/img]
h2onsnow
Member
 
Posts: 14
Joined: January 12th, 2006, 12:07 pm
Location: Pontiac, Michigan

What does this pull or install (pic)!!!

Postby GP396 » February 28th, 2006, 3:20 am

The two shafts look like they would be clutch pullers. The other piece I'm not sure but it may be a spanner wrench socket for removing the spanner nut holding the clutch on.
GP396
Member
 
Posts: 17
Joined: February 8th, 2005, 5:29 am
Location: Saginaw, MI

What does this pull or install (pic)!!!

Postby sno*jetfreak2 » February 28th, 2006, 4:11 am

2 are clutch pullers

1 is a fly wheel puller.
"I find that your American beer is a lot like making love in a canoe, it's ****ing close to water."
Montey Python
sno*jetfreak2
Member
 
Posts: 155
Joined: December 11th, 2003, 8:21 am
Location: Sask Can Eh?


What does this pull or install (pic)!!!

Postby FiredUpRupp » February 28th, 2006, 6:23 am

Looks like pieces to the margaraita blender found on Uller's 72' Daddler.... ;)
FiredUpRupp
Member
 
Posts: 455
Joined: June 11th, 2004, 2:57 pm
Location: best factual trasher=FUR

What does this pull or install (pic)!!!

Postby AHood » February 28th, 2006, 7:59 am

[quote=sno*jetfreak2]2 are clutch pullers

1 is a fly wheel puller.[/quote]

you could think that but the two long bolt type pullers have round heads how are you suposed to tighten them with your hand? and why does one have an angle on the end?

and the "flywheel" puller if it is the flywheel would have to have a large extended external thread on it for that outer shell to thread onto.

so you can all make conjecture but it doesnt look like theres any clear purpose to those pieces
AHood
Member
 
Posts: 48
Joined: February 1st, 2004, 4:12 pm
Location: Merrimac Ma USA

What does this pull or install (pic)!!!

Postby lowtekrednek » February 28th, 2006, 12:01 pm

the cup shaped puller pulls the flywheel off single cyl rotax.
if you want to sell it let me know
lowtekrednek
 
Joined: February 19th, 2006, 3:52 pm
Location: taylors falls

What does this pull or install (pic)!!!

Postby ZR800XC » February 28th, 2006, 2:27 pm

The long puller looking things are probably piston stops...You screw them in to stop the piston to keep the crank from rotating while you tighten the flywheel puller. The straight one would work on straight plug heads and the angled one would work on angle plug heads. ;) Set a spark plug next to 'em, bet the threads are the same......Ingenuity, My Dear Watson!


[img]http://my.core.com/~twister76/twister1.jpg">[/img]

ZR800XC
Member
 
Posts: 23
Joined: December 20th, 2001, 12:18 pm
Location: Michigan

What does this pull or install (pic)!!!

Postby AHood » February 28th, 2006, 5:56 pm

[quote=ZR800XC]The long puller looking things are probably piston stops...You screw them in to stop the piston to keep the crank from rotating while you tighten the flywheel puller. The straight one would work on straight plug heads and the angled one would work on angle plug heads. ;) Set a spark plug next to 'em, bet the threads are the same......Ingenuity, My Dear Watson![/quote]

thats the most reasonable answer ive heard yet and it would make sense if the other was a flywheel puller. now what skidoo engine has a large external thread boss for that puller to fit on.
AHood
Member
 
Posts: 48
Joined: February 1st, 2004, 4:12 pm
Location: Merrimac Ma USA

What does this pull or install (pic)!!!

Postby ZR800XC » March 1st, 2006, 11:43 am

Tool kit for a single cylinder Rotax, check out the flywheel puller....it's uncanny!

[IMG]http://i36.photobucket.com/albums/e46/Zracers77/70tntoly_tools.jpg[/IMG]

Ding, Ding, Ding, Ding..I think the mystery is solved!


[img]http://my.core.com/~twister76/twister1.jpg">[/img]

ZR800XC
Member
 
Posts: 23
Joined: December 20th, 2001, 12:18 pm
Location: Michigan


Return to Vintage Sleds Board

Who is online

Users browsing this forum: No registered users and 2 guests

cron