Subscribe Today

stud pattern for f7

The general snowmobiling discussion. Discuss snowmobile tech, ask about trail conditions, talk about snowmobiling issues, whatever. Just keep it clean!

stud pattern for f7

Postby zrtman800 » December 7th, 2002, 10:23 pm

wondering if anyone has a pattern for the narrower track ? i've also heard about a double digger pattern, could someone please enlighten me?
zrtman800
 
Posts: 2
Joined: December 7th, 2002, 11:11 am
Location: Rochester,MN, USA

stud pattern for f7

Postby dj rev » December 8th, 2002, 6:26 am

go to woody's site at www.wiem.com and they have patterns for f7
dj rev
 
Posts: 2
Joined: December 3rd, 2002, 7:02 am
Location: Warren, Mi

stud pattern for f7

Postby zrtman800 » December 10th, 2002, 9:57 am

thanks for the info just what i needed
zrtman800
 
Posts: 2
Joined: December 7th, 2002, 11:11 am
Location: Rochester,MN, USA


stud pattern for f7

Postby oppatt » December 10th, 2002, 11:50 pm

the pattern on woodys site is not the right one that they are selling. when i purchased the templete at my dealer it has a patterrn for 170 studs.
oppatt
 
Posts: 2
Joined: December 10th, 2002, 11:45 pm
Location: mount clemens, michigan

stud pattern for f7

Postby NerveDamage659 » December 11th, 2002, 5:22 am

Woody's doesn't have a decent pattern for anything much less a firecat...they dont' care about customers they just want to put some coin in their pocket.
Drive fast, take chances.......
NerveDamage659
Member
 
Posts: 10
Joined: March 13th, 2002, 8:08 am
Location: Madison, WI

stud pattern for f7

Postby zrtman800 » December 12th, 2002, 10:15 am

was it an artic cat template or what? havent seen any other template besides the one from woodys
zrtman800
 
Posts: 2
Joined: December 7th, 2002, 11:11 am
Location: Rochester,MN, USA

stud pattern for f7

Postby oppatt » December 13th, 2002, 1:31 pm

the pattern is from International Engineering & Manufacturing, Inc.. which is the same as woddy's or at least owned by woody's. Or something to that effect.


*This Message was edited on 13-Dec-02 06:32 PM by oppatt*
oppatt
 
Posts: 2
Joined: December 10th, 2002, 11:45 pm
Location: mount clemens, michigan

stud pattern for f7

Postby speedbump » December 13th, 2002, 2:37 pm

Check out www.sabertraction.com/usa_cat5.htm they have a double digger type patern for f-cats. I've found that even if you don't use a particular brand of stud that it's always good to look at different ideas
speedbump
 
Posts: 1
Joined: November 21st, 2002, 12:34 pm
Location: RX1/2ton West Branch, Mi


Return to SnowmobileNews Forum

Who is online

Users browsing this forum: No registered users and 6 guests

cron